1. Home
  2. Mining engineering
  3. Sludge dewatering
  4. DRAINTUBE FT
Mining engineering
Water and gas drainage under ponds - HS
Topsoil retention
Waterproofing of structures
Dike drainage
Mechanical protection of structures

Leachate collection
Removal from ditches
Leak detection under waterproofing layer
Leachate drainage on slopes
Water and gas drainage for caps
Earth retention on slopes

Protection and drainage of buried walls
Water barrier, protection and drainage of buried walls
Waterproofing and drainage of buried walls
Waterproofing, drainage and insulation of buried walls
Drainage of roof terraces, esplanades and sports grounds
Under-paving drainage blanket
Drainage of contaminated sites and soil
Soil separation and filtration
Protection against swelling and shrinkage of soils

Drainage in road structure
Draining mask
Road drainage trench earthwork
Water barrier ditches and culverts
Anti-reflective cracking - road repair
Risk of cavities
Reinforcement on compressible soil
Soil reinforcement : rigid inclusions
Improvement in bearing capacity
mechanically stabilized earth (MSE) retaining wall - AFIWALL
Earth retention on slopes
Retaining wall
Drainage under railways
Vertical drainage of engineering structures
Rear drainage of mechanically stabilized earth (MSE) backfill
Extrados drainage
Concrete Canvas

MINING ENGINEERING DRAINTUBE FT

DRAINTUBE FT - Sludge dewatering

DRAINTUBE logo
Marquage CE

Use

To ensure sludge dewatering in coalfields, DRAINTUBE® FT provides a suitable solution to recover as much fresh water as possible from tailings and reduce the carbon footprint of mining waste deposits by reducing their water content.

The installation of DRAINTUBE® FT is a solution which meets air and water quality regulations with a view to limiting the impact of the mining activity on local populations, reducing the environmental footprint and optimising the recovery of tailings water. The mining industry has been asked to reduce the amount of fluid by collecting sludge and storing it in dedicated areas.

Benefits

  • Limited water infiltration in slopes and the bottom of coalfields
  • Slope stability
  • Reduction in water stagnation time
  • Reduced water evaporation
  • Ease of installation with a single product to unroll

Features

Drainage Drainage
Filtration Filtration
Mechanical protection Mechanical protection

Characteristics

  • Polypropylene geocomposite
  • Roll width : 3.90 m
  • Roll length : 50 m
  • 3 diameters of perforated mini-drains : 16 mm, 20 mm and 25 mm
  • 4 possible distances between mini-drains : 200 cm, 100 cm, 50 cm and 25 cm


FIND OUT MORE...

Technical data sheet
Ask for the technical data sheet

Projects completed with DRAINTUBE FT

Drainage and protection under waterproofing layer

Drainage and protection under waterproofing layer

[Public works]

A22 motorway central reservation - Roncq - Tourcoing (59)
43 000 m2
The waterproof area of the A22 motorway’s central reservation is affected by gas leaks. The DRAINTUBE® FT drainage system was installed to drain gases and guarantee the integrity of the geomembrane.

Read more

Waterproofing of motorway ponds

Waterproofing of motorway ponds

[Hydraulic structures]

A63 stormwater ponds - Saint-Geours-de-Maremne (40)
67 000 m2
To ensure the sustainability and waterproofing of the A63 stormwater ponds, a DRAINTUBE® FT solution was implemented. It drains rising groundwater while guaranteeing the waterproofing of the ponds.

Read more